Product Description
Details
The Eminent EM8610 wireless Mobile Alarm System Starter Kit is the perfect solution to secure your home and office. The EM8610 works via the reliable mobile network. With the enclosed back-up batteries you are sure that your system continuously operates in case of a power failure. Setting up the Alarm System is very easy. The Starter Kit has a control panel (with SIM card use*), 1 wireless motion detector, 2 wireless door/window contacts, 2 remotes, 2 RFID tags and power adapter. The Alarm System supports up to 50 wireless sensors. Up to 5 programmable phone numbers are supported. Enough to secure your home or office comfortably. Control the Eminent Alarm System via the control panel, the remote, RFID tag or via the special Eminent Alarm App for Apple IOS or Android.
Alarm notifications via the reliable mobile network
The Eminent EM8610 Alarm System sends alarm notifications via the Mobile SIM-card* in your control panel. This makes the Alarm System more reliable than Systems based on Internet connection or analogue telephone lines. The Mobile wireless Alarm System is suited everywhere in range of a mobile signal. Up to 5 telephone numbers are programmable. The control panel has a built-in 110db Siren. You can listen along in your home with your mobile phone.
Stylish and wireless and easy to install everywhere
The Eminent Alarm System operates completely wireless and therefore easy to install everywhere at your home or office. The door contacts and motion detectors function with batteries. Only the stylish control panel needs a fixed power point. The panel has two backup-batteries inside in case of a power failure.
Expandable up to 50 sensors
The Alarms System supports up to 50 sensors, so your alarm system will be ready for now and the future. You can create up to 9 sensors at home or at your office with unique names. This Alarm System supports four pre-programmed groups. You can easily extend the Starter Kit with a motion detector, door/window contact, smoke detector, external Siren, remote control en RFID tag.
Easily controlled by everyone
It is very easy to control the EM8610 Mobile Alarm System. The alarm can by switched on and off via the control panel. You can use the Remote Control or RFID tag. With the special smartphone App you control your Alarm System everywhere.
* The Eminent alarm works with a mobile phone SIM card. This is not included in the Starter Kit. The alarm system can only be used and configured by SMS text messages. This also applies to the messages via the Android and Apple iOS App. Text messages are sent to the alarm system via your mobile phone. For the use of text messages you will be charged by your telecom provider. Inform with your telecom provider the estimated cost rates for sending text messages. Make sure the credit at your mobile SIM card in the alarm system is sufficient to send SMS messages or to make calls to telephone numbers.
Alarm notifications via the reliable mobile network
The Eminent EM8610 Alarm System sends alarm notifications via the Mobile SIM-card* in your control panel. This makes the Alarm System more reliable than Systems based on Internet connection or analogue telephone lines. The Mobile wireless Alarm System is suited everywhere in range of a mobile signal. Up to 5 telephone numbers are programmable. The control panel has a built-in 110db Siren. You can listen along in your home with your mobile phone.
Stylish and wireless and easy to install everywhere
The Eminent Alarm System operates completely wireless and therefore easy to install everywhere at your home or office. The door contacts and motion detectors function with batteries. Only the stylish control panel needs a fixed power point. The panel has two backup-batteries inside in case of a power failure.
Expandable up to 50 sensors
The Alarms System supports up to 50 sensors, so your alarm system will be ready for now and the future. You can create up to 9 sensors at home or at your office with unique names. This Alarm System supports four pre-programmed groups. You can easily extend the Starter Kit with a motion detector, door/window contact, smoke detector, external Siren, remote control en RFID tag.
Easily controlled by everyone
It is very easy to control the EM8610 Mobile Alarm System. The alarm can by switched on and off via the control panel. You can use the Remote Control or RFID tag. With the special smartphone App you control your Alarm System everywhere.
* The Eminent alarm works with a mobile phone SIM card. This is not included in the Starter Kit. The alarm system can only be used and configured by SMS text messages. This also applies to the messages via the Android and Apple iOS App. Text messages are sent to the alarm system via your mobile phone. For the use of text messages you will be charged by your telecom provider. Inform with your telecom provider the estimated cost rates for sending text messages. Make sure the credit at your mobile SIM card in the alarm system is sufficient to send SMS messages or to make calls to telephone numbers.
Additional Information
- This product does not depend on your operating system
- 5 YEAR WARRANTY
- Control Panel
- ---------------------------------------------------------------------------
- Dimensions in mm. (WxHxD): 188 x 132 x 26
- Weight in grams: 265
- Power supply: 110 240V AC 50-60Hz
- Output: 12V DC 500mAh
- Mobile GSM frequency: 850 / 900 / 1800 / 1900Mhz
- Stand-by current: 110mA
- Alarm current: 340mA
- Power consumption: 2 - 2,5W
- Back-up battery: Lithium-Ion battery 3,7V 800mA BL-5B (2x)
- Internal siren: 110dB
- Maximum amount of sensors:
- 10 x Remote controls
- 50 x Sensors
- 50 x RFID-Tags
- Sensor frequency: 433MHz
- Temperature: -10 to 55 degrees Celsius
- Humidity: < 80% (no condensing)
- Supported languages: EN, NL, DE, FR, IT, ES, PT, HU
- ---------------------------------------------------------------------------
- Motion Detector
- ---------------------------------------------------------------------------
- Dimensions in mm. (WxHxD) motion detector: 108 x 52 x 36,8
- Dimensions in mm. (WxHxD) bracket: 52 x 30 x 26,5
- Weight in grams: 56
- Power supply: 3V DC (2 x AA 1,5V LR6)
- Stand-by current: <90uA
- Alarm current: <9,5mA
- Detection reach: 8 meters / 110 degrees
- Wireless reach: Max. 80 meters (open field)
- Frequency sensors: 433MHz
- Temperature: -10 to 55 degrees Celsius
- Humidity: < 80% (no condensing)
- ---------------------------------------------------------------------------
- Door/Window Contact
- ---------------------------------------------------------------------------
- Dimensions in mm. (WxHxD) sensor: 71 x 34 x 17,5
- Dimensions in mm. (WxHxD) magnet: 51 x 12 x 13,5
- Weight in grams: 16,5
- Power supply: 1,5V DC (2 x AA 1,5V LR6)
- Stand-by current: <35uA
- Alarm current: <10mA
- Wireless reach: Max. 80 meters (open field)
- Frequency sensors: 433MHz
- Temperature: -10 to 55 degrees Celsius
- Humidity: < 80% (no condensing)
Operating System
|
Product Specification
EAN: 8716065298079 |
|
Support
Images
EM8610_R2_product_1.jpg
EM8610_R2_app_1.jpg
EM8610_R2_controlpanel_1.jpg
EM8610_R2_touchscreen_1.jpg
EM8610_R2_boxshot_1.jpg
Faqs
Frequently asked questionsDatasheets
DatasheetDrivers
A driver is not required for this product.Manuals
EM8610_R2_20160317_manual_fr.pdfEU Declaration of conformity
Manual
Quick Install Guide
EM8610 Electronic door lock connection
Shop Online
You can find our products in the following stores:
This product is not available at this moment